BACK TO UNIT SELECTION

WIRING DETAILS FOR A220T HARNESS
Please fill in the form below as accurately as possible and submit. Lengths are in centimetres.
Any functions not required, please enter 'none' or 'n/a'.
We will review the details provided and if there are any questions, we will get in touch.

Thu Dec 9 06:23:46 2021
NAME: PHONE: 
EMAIL: INVOICE: 
AIRCRAFT REG & TYPE: 

The Icom A220T is an avionics stack radio mounted in the panel.
   All wiring should be measured from where the radio is mounted allowing sufficient length for routing around the airframe and securing the wires into place.
POWER: cm A220T to circuit breaker/fuse.
GROUND: cm A220T to ground block.
PILOT HEADPHONE: cm A220T to pilot headphone socket.
PILOT MICROPHONE: cm A220T to pilot microphone socket.
COPILOT HEADPHONE: cm A220T to copilot headphone socket.
COPILOT MICROPHONE: cm A220T to copilot microphone socket.
PILOT PTT: cm A220T to pilot PTT switch.
COPILOT PTT: cm A220T to copilot PTT switch.
INTERCOM SWITCH: cm A220T to intercom on/off switch.
LIGHTING: cm A220T to lighting bus.
REMOTE/RS-232: cm A220T to serial device.
AUXILIARY AUDIO 1: cm A220T to audio 1 (iPad/..).
AUXILIARY AUDIO 2: cm A220T to audio 2 (stall warn/..).
AUXILIARY AUDIO 3: cm A220T to audio 3 (GPS/..).
FREQUENCY EXCHANGE: cm A220T to remote flip switch.
MEMORY CHANNEL: cm A220T to memory channel switch.
INTERLOCK: cm A220T to interlock device.
SPEAKER: cm A220T to cabin speaker.
ANTENNA CABLE: cm A220T to antenna (BNC-BNC)
ANY OTHER NOTES: