BACK TO UNIT SELECTION

WIRING DETAILS FOR KRT2 HARNESS
Please fill in the form below as accurately as possible and submit. Lengths are in centimetres.
Any functions not required, please enter 'none' or 'n/a'.
We will review the details provided and if there are any questions, we will get in touch.

Thu Dec 9 07:39:01 2021
NAME: PHONE: 
EMAIL: INVOICE: 
AIRCRAFT REG & TYPE: 

The TQ KRT2 radio is a single piece radio mounted in the panel.
All wiring should be measured from where the radio is mounted allowing sufficient length for routing around the airframe and securing the wires into place.
POWER: cm KRT2 to circuit breaker/fuse.
GROUND: cm KRT2 to ground block.
PILOT HEADPHONE: cm KRT2 to pilot headphone socket.
PILOT MICROPHONE: cm KRT2 to pilot microphone socket.
COPILOT HEADPHONE: cm KRT2 to copilot headphone socket.
COPILOT MICROPHONE: cm KRT2 to copilot microphone socket.
PILOT PTT: cm KRT2 to pilot PTT switch.
COPILOT PTT: cm KRT2 to copilot PTT switch.
INTERCOM SWITCH: cm KRT2 to intercom on/off switch.
RS-232: cm KRT2 to serial device. (GPS/EFIS)
AUXILIARY AUDIO: cm KRT2 to audio (iPad/stall warn/..).
SPEAKER: cm KRT2 to cabin speaker.
ANTENNA CABLE: cm KRT2 to antenna (BNC-BNC)
ANY OTHER NOTES: